PYY Hydraulic Cone Crusher

1. Materials are crushed into much smaller size, realizing more fine products but less grinding. The crushing capacity in the following process is increased, and the power consumption of system is reduced.
2. Larger capacity and smaller size of final product reduce cyclic load, so the abrasion between the chute of vibrating screen and belt conveyor greatly reduced, and power consumption of belt conveyor is reduced too.
3. Spare parts can be easily changed, so downtime is shortened.
PYY Seriers Hydraulic Cone Crusher Working Principle:
Crushing process is completed between the fixed cone and eccentric rotating moving cone. Horizontal axis of crusher is driven by motor through the V-belt, the horizontal axis drives the eccentric cover by the gear. Eccentric cover makes main shaft rotate to cause eccentricity. Materials enter crushing chamber through upper inlet of crusher, and crushed products are discharged out through the lower outlet.
PYY Seriers Hydraulic Cone Crusher Advantages:
1. Human design and hydraulic adjustment of discharge outlet saves time and work. Adjustment can be controlled by buttons.
2. Single hydraulic system adjusts main shaft and body, the body can rise and decline integrally to adjust discharge size, so slope of side cylinder and upper frame can be avoided.
3. Working pressure system can be adjusted hydraulically; pressure adjusting system can discharge super hard materials to protect the machine.
4. Spare parts can be changed easily. The rolling mortar wall and cone body combined stably after precise design, and there's no need to fill again, so time to change spare parts can be saved. Stuffing is not necessary to be filled as the installation of rolling mortar is very stable.
5. Hydraulic pressure of the whole machine is low, so the pressure to hydraulic parts and main engine is also low, hydraulic system is more durable and stable.
6. The size and weight of this machine are relatively small, so installation and transportation are very convenient.
PYY Seriers Hydraulic Cone Crusher Technical parameters of fine type :
Model | Type of | Feed inlet | Max. feed | Min discharge size (mm) | Max. feed & size (mm) | Power | Weight | ||||
Stroke | Stroke | Stroke | Stroke | Stroke | Stroke | ||||||
PYY |
| 16 | 22 |
| 16 | 22 |
| 90 | 6 | ||
A | 150 | 120 | 12 | 15 |
| 39 | 37 |
| |||
B | 130 | 105 | 10 | 11 |
| 33 | 31 |
| |||
C | 100 | 85 | 7 | 9 |
| 33 | 30 |
| |||
D | 40 | 32 | 5 | 6 |
| 31 | 29 |
| |||
PYY |
| 18 | 25 |
| 18 | 25 |
| 160 | 10.6 | ||
A | 220 | 180 | 18 | 22 |
| 35 | 30 |
| |||
B | 150 | 120 | 15 | 19 |
| 35 | 30 |
| |||
C | 80 | 60 | 9 | 12 |
| 35 | 30 |
| |||
D | 40 | 32 | 6 | 8 |
| 35 | 30 |
| |||
PYY |
|
|
| 25 | 32 |
| 25 | 32 |
| 250 | 18.5 |
A | 230 | 190 | 20 | 25 |
| 45 | 40 |
| |||
B | 150 | 125 | 17 | 20 |
| 45 | 40 |
| |||
C | 80 | 60 | 10 | 13 |
| 40 | 35 |
| |||
D | 40 | 32 | 6 | 8 |
| 40 | 35 |
| |||
PYY |
|
|
| 25 | 32 | 40 | 25 | 32 | 40 | 315 | 22.5 |
A | 230 | 180 | 22 | 26 | 30 | 50 | 45 | 40 | |||
B | 150 | 125 | 19 | 22 | 26 | 48 | 43 | 38 | |||
C | 100 | 80 | 12 | 14 | 16 | 40 | 35 | 30 | |||
D | 50 | 40 | 8 | 10 | 12 | 30 | 25 | 20 | |||
Technical parameters of Mid fine-crushing type :
Model | Type of | Feed inlet | Max. feed | Min discharge size (mm) | Max. feed & size (mm) | Power | Weight | ||||
Stroke | Stroke | Stroke | Stroke | Stroke | Stroke | ||||||
PYYZ |
| 16 | 22 |
| 16 | 22 |
| 75-90 | 7.3 | ||
A | 250 | 210 | 25 | 30 |
| 45 | 40 |
| |||
B | 200 | 170 | 20 | 25 |
| 41 | 36 |
| |||
PYYZ |
| 18 | 25 |
| 18 | 25 |
| 110-160 | 11.8 | ||
A | 330 | 280 | 27 | 30 |
| 65 | 60 |
| |||
B | 250 | 210 | 25 | 28 |
| 60 | 55 |
| |||
PYYZ |
|
|
| 25 | 32 |
| 25 | 32 |
| 160-250 | 20 |
A | 380 | 320 | 28 | 32 |
| 73 | 69 |
| |||
B | 280 | 240 | 26 | 30 |
| 66 | 62 |
| |||
PYYZ |
|
|
| 18 | 25 | 32 | 18 | 28 | 32 | 250-315 | 33 |
A | 500 | 420 | 50 | 55 | 60 | 80 | 75 | 70 | |||
B | 380 | 320 | 40 | 45 | 60 | 70 | 65 | 60 | |||
The above technical parameters are subject to change without prior notice.
PYY Hydraulic Cone Crusher Manufacturer,Supplier&Factory search on:Google, Yahoo, Msn







